Please press Enter to activate this console.
[   15.258173] kmodloader: loading kernel modules from /etc/modules.d/*
[   15.468455] urngd: v1.0.2 started.
[   15.570521] l2tp_core: L2TP core driver, V2.0
[   15.573438] l2tp_netlink: L2TP netlink interface
[   15.809459] hotplug: symlinking qca-nss0.bin to /lib/firmware/qca-nss0-retail.bin
[   15.994398] qca-nss 7a00000.nss: NSS fw version: NSS.FW.12.5-210-MP.R
[   15.994458] qca-nss 7a00000.nss: fw of size 792924 bytes copied to addr: 40000000, nss_id: 0
[   16.003453] ffffffc0790cb240: NSS core 0 DDR from 40000000 to 41000000
[   16.038531] qca-nss 7a00000.nss: NSS core 0 booted successfully
[   16.048035] nss-dp 39d00000.dp2 eth0: PHY Link is down
[   16.048518] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[   16.052175] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[   16.053177] nss-dp 39d00000.dp2 eth0: PHY Link up speed: 1000
[   16.061826] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[   16.061858] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[   16.137283] gre: GRE over IPv4 demultiplexor driver
[   16.139818] ip_gre: GRE over IPv4 tunneling driver
[   16.157147] QCA multicast snooping installed successfully
[   16.168318] GACT probability on
[   16.171450] Mirror/redirect action on
[   16.204441] u32 classifier
[   16.204609]     input device check on
[   16.206230]     Actions configured
[   16.327742] ntfs3: Enabled Linux POSIX ACLs support
[   16.359878] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[   16.359924] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[   16.404815] NET: Registered PF_QIPCRTR protocol family
[   16.467818] xt_time: kernel timezone is -0000
[   16.722428] PPP generic driver version 2.4.2
[   16.725824] NET: Registered PF_PPPOX protocol family
[   16.729368] PPTP driver version 0.8.5
[   16.736097] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   16.736137] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   16.769570] ath11k c000000.wifi: ipq5018 hw1.0
[   16.769612] ath11k c000000.wifi: FW memory mode: 2
[   16.850720] remoteproc remoteproc1: powering up pd-1
[   16.851597] remoteproc remoteproc1: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[   16.854867] remoteproc remoteproc0: powering up cd00000.remoteproc
[   16.863388] remoteproc remoteproc0: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[   19.302426] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   19.319235] remoteproc remoteproc1: remote processor pd-1 is now up
[   19.321343] ath11k b00a040.wifi1: Multipd architecture - userpd: 2
[   19.325507] ath11k b00a040.wifi1: qcn6122 hw1.0
[   19.330629] ath11k b00a040.wifi1: FW memory mode: 2
[   19.349763] ath11k c000000.wifi: qmi fail to get qcom,m3-dump-addr, ignore m3 dump mem req
[   19.357245] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[   19.357376] ath11k c000000.wifi: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[   19.419478] remoteproc remoteproc2: powering up pd-2
[   19.419795] remoteproc remoteproc2: Booting fw image ath11k/IPQ5018/hw1.0/q6_fw.mdt, size 1820
[   19.435155] remoteproc remoteproc2: remote processor pd-2 is now up
[   19.442645] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   19.455124] kmodloader: done loading kernel modules from /etc/modules.d/*
[   19.541081] ath11k b00a040.wifi1: qmi ignore invalid mem req type 10
[   19.572674] ath11k b00a040.wifi1: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[   19.572741] ath11k b00a040.wifi1: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
[   20.863029] ath11k c000000.wifi: nss init soc nss if_num 203 userpd_id 0
[   21.965884] ath11k b00a040.wifi1: nss init soc nss if_num 215 userpd_id 1
[   21.980740] debugfs: Directory 'dbg_infra' with parent 'ath11k' already present!
[   28.993435] ECM init
[   28.993574] ECM database jhash random seed: 0xab52a47b
[   29.048998] ECM init complete
[   29.235602] nss-dp 39d00000.dp2 eth0: PHY Link is down
[   29.256412] nss-dp 39d00000.dp2 eth0: PHY Link up speed: 1000
[   29.272012] qca8k 90000.mdio-1:11 lan1: configuring for phy/gmii link mode
[   29.326406] br-lan: port 1(lan1) entered blocking state
[   29.326521] br-lan: port 1(lan1) entered disabled state
[   29.332249] qca8k 90000.mdio-1:11 lan1: entered allmulticast mode
[   29.335802] nss-dp 39d00000.dp2 eth0: entered allmulticast mode
[   29.344498] qca8k 90000.mdio-1:11 lan1: entered promiscuous mode
[   29.403270] qca8k 90000.mdio-1:11 lan2: configuring for phy/gmii link mode
[   29.404849] br-lan: port 2(lan2) entered blocking state
[   29.411945] br-lan: port 2(lan2) entered disabled state
[   29.414661] qca8k 90000.mdio-1:11 lan2: entered allmulticast mode
[   29.422402] qca8k 90000.mdio-1:11 lan2: entered promiscuous mode
[   29.450294] qca8k 90000.mdio-1:11 lan3: configuring for phy/gmii link mode
[   29.451494] br-lan: port 3(lan3) entered blocking state
[   29.456250] br-lan: port 3(lan3) entered disabled state
[   29.464482] qca8k 90000.mdio-1:11 lan3: entered allmulticast mode
[   29.474551] qca8k 90000.mdio-1:11 lan3: entered promiscuous mode
[   29.531385] qca8k 90000.mdio-1:11 wan: configuring for phy/gmii link mode
[   30.248781] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[   30.248854] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[   31.376517] qca8k 90000.mdio-1:11 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   31.376863] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[   31.396224] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[   31.396370] br-lan: port 1(lan1) entered blocking state
[   31.401465] br-lan: port 1(lan1) entered forwarding state
[   32.652334] qca8k 90000.mdio-1:11 wan: Link is Up - 1Gbps/Full - flow control rx/tx
[   32.652570] adpt_mp_port_netdev_change_notify[1186]:ERROR:netdev change notify with incorrect port 0
[   32.666353] ssdk_dev_event[2313]:ERROR:netdev change notify failed
[   39.367690] qca-nss 7a00000.nss: Configuring additional NSS pbufs
[   39.392238] qca-nss 7a00000.nss: Additional pbufs of size 3100672 got added to NSS